Характеристики и описание
Описание оборудования | |
|---|---|
| Retroreflective sensor for standard applications, miniature design, polarization filter, 1000mm detection range, red light, dark on, PNP output, fixed cable with M8 plug | |
General specifications | |
| Effective detection range | 0 ... 1 m |
| Threshold detection range | 1.4 m |
| Light source | LED |
| Light type | modulated visible red light , 630 nm |
| Polarization filter | yes |
| Diameter of the light spot | approx. 60 mm at a distance of 800 mm |
| Angle of divergence | approx. 2 ° |
Functional safety related parameters | |
| MTTFd | 800 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Indicators/operating means | |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
Electrical specifications | |
| Operating voltage | 10 ... 30 V DC , class 2 |
Output | |
| Switching type | NO contact / dark on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Compliance with standards and directives | |
| Directive conformity | |
Mechanical specifications | |
| Housing width | 7.5 mm |
| Housing height | 26 mm |
| Housing depth | 13.8 mm |
| Degree of protection | IP67 |
| Connection | 200 mm fixed cable with 3-pin, M8x1 connector |
| Material | |
Описание оборудования
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
Retroreflective sensor with polarization filter OBR1000-R3-E2-0,2M-V3
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии